Winsor & Newton WINTON Artists Oil Colour 200ml Paint Tubes

Winsor & Newton WINTON Artists Oil Colour 200ml Paint Tubes

Individual 200ml. tubes

View video

Product tabs


    WINTON Oil Colour 200ml Tubes

    Winton is a traditional range of oil colours, made from moderately priced pigments, formulated for student and amateur artists or more accomplished painters requiring large volumes of colour within moderate cost limits. The application of traditional skills and modern colour chemistry techniques has resulted in a range of 47 carefully selected Winton Oil Colours which are of excellent quality.

    As with Artists' Oil Colour, every colour in the Winton range is individually formulated to take advantage of the natural characteristics of each pigment and to ensure the stability of the colour.
    Pigment loading/tinting strength 
    A high level of pigmentation provides good covering power and tinting strength. While it can't match the superior pigment load of Artists' Oil Colour, the Winton range is much stronger than many other artists' quality ranges.
    The economical cost has been achieved through the use of moderately priced pigments rather than lessening the pigment content to an unacceptable level. Winsor & Newton formulation, manufacture and quality control ensure a product of absolute excellence.
    Single Pigments 
    We use single pigments wherever possible to create individual colours. Combined with strength of colour, single pigments provide a wide colour range in themselves and offer cleaner, brighter mixtures with infinite hues.
    This is particularly important for violets, greens and oranges. Single pigment 'secondaries' considerably broaden the artist's available spectrum.
    The Winton range has a more uniform consistency than Artists' Oil Colour and is slightly stiffer. It offers excellent retention of brush and palette knife strokes.
    Transparency & Opacity
    Pigments vary in their transparency by nature. On the Winsor & Newton Winton Oil Colour chart and individual colour pages of this site, the transparent colours are marked with T, the semi-transparent colours are marked ST. The relatively semiopaque colours are marked with SO and the opaque colours are marked with O.
    Remember that the level of transparency of a colour is relative to other colours. Transparent colours are used for glazing and tinting, providing optical colour mixtures and depth of colour to the painting surface. Opaque colours cover well, give flat areas of colour and obscure/mask the underlayers of the painting.
    Winton Oil Colour is formulated to reflect the characteristics of each of the various pigments, ensuring that synthetic organics such as Phthalocyanines and Quinacridones [ie. "Winsor" or "Permanent colours"] deliver maximum transparency, whilst Cadmiums and Earth colours offer excellent opacity.
    Surface sheen
    As with the Artists' Oil Colour range, the surface sheen of Winton is largely due to the pigment used. The level of gloss will therefore vary, although Winton is more uniform across the range.
    Wherever possible, the most permanent pigments have been selected for use with the Winton range. The formulation and manufacturing process ensure that the product will remain stable within the tube as well as offer the most permanent paint film possible (when applied appropriately).
    All Winton colours are either AA and A rated and are recommended as permanent for artists' use. Please refer to the permanence ratings provided on the colour chart, composition and permanence table and the tube labels.
    Drying time 
    All colours will become touch dry in 2-12 days. The different drying rates are due to the different reaction of each pigment when mixed with oil.
    Winsor & Newton formulate colours to optimise drying rates, helping artists to avoid the problems of slow drying underlayers. However, the following list is a guide to the likely variations:
    • Fast drying (around 2 days): Prussian Blue, Raw Sienna, Umbers.
    • Medium Drying (around 5 days): Phthalo Blue and Viridian Hue (phthalocyanines), Burnt Sienna, Ultramarine Blues, Synthetic Iron Oxides, Ochres, Titanium White, Zinc White, Lamp Black, Ivory Black.
    • Slow Drying (more than 5 days):Cadmium Hues (arylamides), Permanent Rose (Quinacridone), Alizarin Crimson Hue.
    As with all oil paintings, to avoid yellowing of the oil, paintings should not be allowed to dry in places with continuous darkness or high humidity.
    Whites in Range 
    The choice of whites in Winton Oil Colour ensure that artists have the widest possible selection, as in every other part of the spectrum.
    Painting Whites
    White is the most used colour. The four whites in Winton Oil Colour offer different working characteristics to the painter.
    Titanium White 
    The most popular modern white. It is the whitest, most opaque white.
    Flake White Hue 
    A less hazardous alternative to the traditional lead based white. This colour has been formulated to match the tinting strength and consistency of the original Flake White.
    Zinc White 
    The least opaque white, making it ideal for tints and glazing.
    Soft Mixing White
    A titanium based white with the softest consistency. It has lower tinting strength than Titanium White.


Earn 0Reward points


Do you want to be notified when this product is back in stock? Complete the form below and we'll let you know when it is.

Recommend this product

Winsor & Newton WINTON Artists Oil Colour 200ml Paint Tubes